Who Owns the Barcode? GTIN Rules for K-Beauty Made by a Korean ODM

Quick Answer

Your brand should own the GTIN behind the barcode, even when a Korean ODM makes and packs the product. GS1, the standards body behind retail barcodes, says the brand owner normally assigns the GTIN wherever the item is made. License your own GS1 Company Prefix, give the ODM one number per variant, and check the printed proof before you approve artwork.

The barcode is often the last box on a dieline and the first thing a buyer scans. When a Korean ODM handles your packaging, it may offer to put a code on the carton for you. Whose number that is decides who controls your product's identity in stores and on marketplaces.

This guide covers the GS1 ownership rule, what the 880 prefix means, the ten triggers for a new GTIN, and what to settle with your ODM before artwork is final.

Key Takeaways

  • The brand owner, the company that owns the product's specifications, normally assigns the GTIN. The factory does not.
  • A number built on your ODM's GS1 Korea prefix belongs to the ODM's number bank, so it does not move with you if you switch factories.
  • An 880 prefix shows that GS1 Korea issued the number. It says nothing about where the product was made.
  • Each size, scent, language version and set needs its own GTIN.
  • Amazon verifies product IDs against the GS1 database.

Who Should Own the GTIN When a Korean ODM Makes Your Product?

The brand owner should. GS1 defines the brand owner as the organization that owns the trade item's specifications, "regardless of where and by whom it is manufactured." That organization is normally responsible for allocating the GTIN (GS1).

A GTIN (Global Trade Item Number) is the number encoded in the barcode on your carton. A GS1 Company Prefix is the block of numbers that a GS1 member organization licenses to one company, and every GTIN that company creates starts with it. The same GS1 page says a prefix is for the sole use of the company it was assigned to and may not be sold, leased or given to another company.

When your company owns the brand name and approves the final formula and packaging, you are the brand owner and the ODM is the manufacturer. GS1 also names a retailer as the brand owner when the retailer has a product made and sells it under its own brand.

Barcode ownership is separate from who owns the formula or the trademark. Those rights sit in your ODM agreement, covered in our guide to who owns your K-beauty formula and trademark.

What Changes When the Factory's Code Is on Your Box

A barcode built on the ODM's prefix ties your product to the ODM's GS1 account instead of yours. That matters in four places, so treat a factory-supplied code as a decision, not a favor.

SituationGTIN from the ODM's prefixGTIN from your prefix
Whose number it isLicensed to the ODMLicensed to your company
You move productionYou need new GTINs, and every buyer must update its item recordsUnchanged products can keep their GTINs
You add a size or scentThe ODM has to issue each new numberYou assign it from your own number bank
Someone checks the numberIt traces back to the factoryIt traces back to your company

GS1 explains how to find out which company assigned a GTIN. Run that check on any number a factory or reseller hands you.

Does an 880 Barcode Mean the Product Was Made in Korea?

No. An EAN-13 number starts with the GS1 prefix of the member organization that allocated it. GS1 states that the prefix does not show where a product was made (GS1). Numbers allocated through GS1 South Korea start with 880 or 881, according to the GS1 prefix list.

So a Korea-made serum can carry a GS1 US number, and an 880 number can sit on a product made elsewhere. The "Made in Korea" line on your label states origin. The barcode does not.

One practical point: some small shops and specialty stores in the US and Canada cannot handle 13-digit EAN codes. GS1 notes that they may ask for 12-digit UPC codes instead (GS1). Ask your first buyers which format they scan before you print.

Six Steps to Set Up Barcodes Before Artwork Is Final

Barcode setup takes six steps, and all of them happen before you sign off on the dieline. The order matters because the number has to exist before the artwork can carry it.

  1. License your own prefix. Join a GS1 member organization, usually the one where your company is based, such as GS1 US for a US company. After you join, GS1 says you are responsible for allocating a unique number to each product (GS1).
  2. List every sellable variant. Each size, scent, shade, language version and set is its own trade item. The GS1 GTIN Management Standard even treats an English pack and a Spanish-language-only version of the same product as two products.
  3. Assign one GTIN per variant and record it. Keep a master sheet with the GTIN, product name, net content and the ODM's item code side by side.
  4. Send the ODM a barcode brief with the dieline. List the GTIN for each SKU, the symbol type your buyers scan, and where the barcode sits on the carton and the container. Ask the printer to follow the GS1 size and quiet-zone specifications.
  5. Check the proof before you approve it. Match every digit to your master sheet and scan a printed sample, not only the PDF.
  6. Add case codes if buyers ask for them. A shipping case gets its own GTIN, and Amazon's help notes that GTIN-14 codes appear on shipping containers (Amazon). A new count per case needs a new case GTIN under the GS1 rules.

Container choice also decides how much flat space the barcode gets. Our Korean ODM packaging guide compares tubes, airless pumps, droppers and jars.

"I'm Liz, I run altameet from Manhattan, NYC. A barcode is a ten-minute decision before artwork is approved and a reprint after it. If you want a quick gut-check on whether Korean ODM fits your project, I'll give you 15 minutes free."

Book a free 15-min gut-check

When Does a Product Change Need a New GTIN?

A new GTIN is required when a change hits one of the ten rules in the GS1 GTIN Management Standard. New products always get new numbers, and any change to the declared net content on the pack needs one too (GS1). Local law comes first: GS1 says legal and regulatory requirements supersede the standard.

ChangeNew GTIN on the unit?K-beauty example
New product, including a new size, scent or language-only versionYesA Korean-only pack of your US serum
Declared net content changesYes, for any changeA 50 ml bottle becomes 40 ml
Declared formulation or functionality changesYes, when it changes legally required label information and buyers are expected to tell the differenceA reformulation that changes the printed ingredient list and is marketed as an upgrade
Dimensions or gross weight change by more than one fifth on any axisYesA plastic tube becomes a glass jar
A certification mark is added or removedYesA halal or organic mark comes off the carton
The primary brand changesYesThe line is renamed
Time-limited promotionNo on the unit, yes on cases and palletsA holiday sleeve for one season
Units per case changeCase level onlyYour case pack count changes
A fixed set changesYesThe toner in a three-piece kit is swapped
A price is printed on the packYes, and GS1 advises against printed pricesA retail price is added

A change of factory is not on the list. If the formula, net content, brand and pack stay the same, the GTIN can stay the same, which is one more reason the number should be yours.

Amazon Checks Product IDs Against GS1 Records

Amazon's US help page says product IDs are verified against the GS1 database (Amazon Seller Central). The same page says false product identification is prohibited and can cost a seller its ASIN creation privileges.

Amazon also asks for an industry-standard product ID, such as a UPC or EAN, to create new product pages in most categories. Requirements and exemptions are set by category (Amazon), so check the category page before you list.

The cleanest number for a marketplace listing is one licensed to your company, under the brand name on your pack. If Amazon is in your plan, our FBA vs 3PL vs DTC comparison covers the next decisions. Date and shelf-life rules are a separate check, covered in our shelf-life guide for selling online.

What Should Your ODM Agreement Say About Barcodes?

Put barcode ownership in writing before artwork approval. A short clause and a shared GTIN sheet settle the question before anything is printed.

  • The brand supplies every GTIN from its own GS1 prefix, and the ODM prints only those numbers.
  • The ODM does not assign numbers from its own prefix to the brand's products.
  • Barcode placement, size and symbol type are fixed on the approved dieline.
  • Any change that triggers a GS1 new-GTIN rule waits for a new number from the brand.
  • If production moves, the brand keeps its GTINs for unchanged products.

The same GTIN sheet feeds your wholesale paperwork, since a line sheet lists a GTIN per SKU. See our guide to line sheets and order terms. For the wider launch order, read our playbook for selling Korean cosmetics in the US. New to Korean manufacturing? Start with our step-by-step guide to starting a K-beauty skincare brand.

Barcode Setup Checklist

Walk through this checklist for your own SKUs on a free 15-minute call.

Get the Free Checklist

Frequently Asked Questions

Can I buy cheap UPC codes from a reseller instead of GS1?
GS1 says a company prefix is for the sole use of the company it was assigned to and may not be sold, leased or given to another company. A resold number still traces back to someone else's prefix. Amazon verifies product IDs against the GS1 database, so license your own prefix from a GS1 member organization.

Can I use my GS1 US barcodes on products I also sell in Korea?
Yes. GS1 says its barcodes are accepted all over the world. A Korean-language-only version of the same product is a separate trade item under the GS1 standard, so give it its own GTIN from the same prefix.

Who owns the GTIN on a retailer's private label line?
The retailer does when it has the product made and sells it under its own brand. GS1 lists the retailer as the brand owner in that case, whichever factory makes the product.

Do I need a new GTIN if I only refresh the box design?
Not by itself. The GS1 rules list set triggers for a new GTIN. They include a change in declared net content, the primary brand or a certification mark, and a large change in pack size or weight. A graphics refresh that changes none of those can keep the same number.

By Liz Song, K-beauty sourcing consultant.

Next
Next

Ergothioneine Skincare: A K-Beauty Founder's Sourcing Guide (2026)